"Login incorrect..." when starting session.
Most likely, you are using the wrong username, wrong password, or a combination of both. In most cases, usernames and passwords are all lowercase.
Back to top
"Blocking call canceled...' received when uploading files.
Most likely, you are using WS_FTP to upload your site. The information below shows how to correct this problem in WS_FTP specifically, although the information may be useful for other FTP clients as well.
The "Blocking call canceled" error can be fixed in the WS_FTP Pro classic interface by checking (or un-checking) the Use Passive Transfer Mode checkbox on the Session tab of the Options dialog box, and clicking the Set As Default button. You can also use the Advanced Tab of Session Properties to do the following: Select Passive Transfers and increase the Network Timeout setting to 120. Note that you must save your changes by clicking the Apply button!
Starting with version 6.50 Use Passive Transfer Mode is turned on by default.
In the WS_FTP Pro Explorer interface, the "Blocking call canceled" error can be fixed by selecting the Advanced tab of the Site Properties, selecting Passive Transfers, and increasing the Network Timeout setting to 120.
If you still receive this error after making the above changes, try the Windows command line FTP and see if you can connect and how long it takes. Once you know how long it takes to connect, enter this time into the Network Timeout setting on the Advanced tab of either Session Properties (classic interface) or Site Properties (Explorer interface).
Back to top
"Connection refused..." when attempting to upload.
Most likely, you are using the wrong username, wrong password, or a combination of both. In most cases, usernames and passwords are all lowercase.
Back to top
"Permission denied..." when uploading.
Make sure that the FTP settings are correct. Most likely, you are using the wrong FTP host. It is also possible that you are using an invalid character in the filename. This can be checked by using viewing the Source Document and examining the links. If you find "%20" there is a space in the original filename. If the filenames and the links are correct, please contact Flarehosting.com through our ticket manager.
Back to top
"Cannot set guest privileges..." when starting.
Most likely, you have the wrong FTP settings. Make sure your FTP program is not set on Anonymous Login.
Back to top
"24 bare linefeeds received, the file may not have transferred properly..." after uploading.
This is most likely caused by an HTML editor that places a lot of carriage returns at the end of the file. You can ignore this error message for the most part unless the file uploaded is not viewable (very unlikely).
Back to top
| |
|
|
